Skip to content

Breaking Arrays, Moving Data, LVM Good for something

Last updated on February 12, 2017

Who knew LVM would be good for something. Well, maybe, I’ll know for sure sometime tomorrow, or late tonight, if it works it’ll be great, if it doesn’t. I’ll be damn glad I backed up these drives.

Yeah, so back to LVM. I always wondered if creating an LVM volume over the top of an MD raid volume was a good idea or if it wasn’t just adding extra overhead. And EXT4 partition can be extended without the help of LVM and so can an MD raid device. So why add the extra layer in there.

pvmove

That’s why.

Breaking Arrays, Making Arrays

Wanting to avoid the “blow it away and restore from backup” strategy, especially since WD Caviar Greens are so damn slow compared to just about everything else, I decided the best course of action would be to split the existing unresizable md array and create a new second one. Something like….

mdadm /dev/md0 --fail /dev/sdb1
mdadm /dev/md0 --remove /dev/sdb1
mdadm --create /dev/md1 --level=1 --raid-devices /dev/sdb1 missing

The end result, 2 degraded but fully functional md arrays. One still hosting the data volume group with my home logical volume, and one with a big empty disk.

The trick now is to move the data.

LVM Really is Good for Something

The question of how to move the data stumped me for a bit. I could create a new volume group (VG), or at least a new logical volume in the same data VG I already had, format it, and rsync the data across. Of course then I would have to edit at least my /etc/fstab and to get things pointed to the right place. The alternative that came up as I was digging though the LVM documentation is a nifty function called pvmove (8) that will move the physical extents of an LVM from one physical drive to another in a volume group (or to multiple drives in a volume group if needed). Moreover, as best as I can interpret the docs, it does this in a way that’s safe to do with the system online.

All told, for my system, the process looked something like this…

vgextend data /dev/md1
pvmove /dev/md0 /dev/md1

Now it’s back to the waiting game. It’ll be 5 or 6 hours before the pvmove is complete, then I have to tear down the md0 raid array and add the /dev/sdd device that’s left in md0 to md1. That will necessitate a 6, or so, hour re-sync. After which, I’ll reboot, make sure md1 becomes md0 and everything is found properly. Then it should hopefully be a short task of expanding the logical volume from 1.5TB to 2TB and then the EXT4 file-system inside of it. If not, well I’ll be damn glad I made that 6-hour long backup, wont I?

Published inComputersLinux

2 Comments

Comments are closed.